The ever-increasing generation of waste materials has become a major environmental concern, highlighting the need for sustainable waste management strategies.This study explores the catalytic pyrolysis of waste lubricant oils using a waste oilfield scale as a low-cost solid catalyst to produce value-added fuel products.The pyrolytic distillation of waste engine oil was carried out in a manual distillation unit, employing a calcium carbonate (CaCO3) scale as a catalyst under various reaction conditions.Distillation experiments were conducted at 300 °C, 320 °C, and 350 °C, with and without adding NaOH and CaCO3 catalysts.The distillate fractions were characterized, and their properties were compared to standard fuel specifications.The results demonstrated that increasing the pyrolysis temperature and employing CaCO3 as a catalyst significantly enhanced the distillate yield and improved key fuel properties.At 350 °C, the distillate yield reached 56 % with 4 g of CaCO3, exhibiting desirable d. (0.8049 g/cm3), viscosity (2.31 cSt at 40 °C), sulfur content (0.43 wt%), and a calorific value of 43,152 kJ/kg.Further, the distillate fractions were separated into gasoline (80-150 °C), kerosene (180-270 °C), and gas oil/diesel (270-350 °C) ranges, with the diesel fraction showing a promising cetane number of 51.The catalytic pyrolysis fuel (CPF) obtained from distillation with 4 g CaCO3 at 350 °C, followed by bleaching with CaO, exhibited excellent properties, including a d. of 0.8297 g/cm3, viscosity of 2.71 cSt at 40 °C, pour point of -12 °C, sulfur content of 0.201 wt%, and a calorific value of 43,961 kJ/kg.The GC anal. revealed a paraffin-rich composition in the desired fuel ranges, contributing to the desirable fuel properties.